NANO MISTER 40ml White USB Nano Vaporizer

1. Connect the charging cableat the bottom of the device and connect the other side to a USB input. After about2 hourscharging will be complete.
2. Unscrew the cap and add waterto the tank, then close it again.
3. Slide the switch downto open the spray nozzle. The blue LED light indicates that the device is on, the red light indicates charging, and the green light indicates full charging. Pressing the switch that activates the LCD screen allows you to monitor the battery status at any time.
4. If used for eyelash extension treatment:We recommend using distilled water. At the end of the extension treatment, position the device about 20 cm from the client's face and create a cloud of moisture around the eyes by leaving the vaporizer on for about 4-5 seconds. It's important to avoid creating water droplets on the face and/or lashes, as this would produce the opposite effect—shock polymerization—which would weaken the hold of the eyelash extensions.If used on the face:Mineral water is recommended. Press the start switch to activate the LCD screen. The metal probe allows you to check your skin condition on the screen at any time. Hold the device about 5 cm from your face if you are not wearing makeup, and about 12 cm if you are wearing makeup.
   

NOTE: During use, a small amount of water droplets may collect around the spray nozzle. After use, wipe them off with a paper towel. To clean the device, use a soft, damp cloth (without any detergent) and then dry.